-
Operation Temp.: -20 ~ 60 °C,
-
IP Grade: IP 54,
-
Optional Reduction Ratio: 14, 19, 27, 35 & 51,
-
Made in Taiwan.
Model No. |
Reduction Ratio |
Stroke | Voltage | Rate Current | Max. Current | Rate Load | Max. Load | Speed at Max. Load | Speed at No Load | Duty Cycle | Net Weight |
Packing (KGs) |
mm. | DC(V) | A | A | Nm | Nm | mm./sec. | mm./sec. | % | KGs | Pcs/Ctn/NW/GW/Cuft | ||
ELA-0101 | 35 | 100 | 24 | 0.7 | 2.5 | 470 | 1900 | 6.3 | 16 | 20 | 0.61 | 12/CTN/8.4/9.4/0.6' |
ELA-0102 | 35 | 200 | 24 | 0.7 | 2.5 | 470 | 1900 | 6.3 | 16 | 20 | 0.76 | 12/CTN/10.2/11.2/0.76' |
ELA-0103 | 35 | 300 | 24 | 0.7 | 2.5 | 470 | 1900 | 6.3 | 16 | 20 | 0.93 | 12/CTN/12.2/13.2/0.91' |
ELA-0104 | 35 | 400 | 24 | 0.7 | 2.5 | 470 | 1900 | 6.3 | 16 | 20 | 1.1 | 12/CTN/14.2/15.2/1.06' |
ELA-0105 | 35 | 500 | 24 | 0.7 | 2.5 | 470 | 1900 | 6.3 | 16 | 20 | 1.25 | 12/CTN/16/17/1.22' |
1. Before using it, the machine must be checked, and a responsible person is needed.
2. If found missing parts, please repair in time, otherwise, will decrease the life of the machine.
3. If socket doesn't cover nut (screw slot), it is forbidden to press the switch.
4. The hub connection must be connected with a special pin and sealing aprons. (screwdriver lock type)
5. When the machine is off-duty, it must be clean and stored in a proper place.
6. To prevent premature wear of the machine, please do not overload or high speed idle.
7. Daily and monthly maintenance should be done in order to extend the life of the machine