GO
Composite Impact Wrench - Twin Hammer
PIW-0800 Series
Description
  • Handle exhaust,

  • Composite design,

  • Easy to use forward / reverse push buttons,

  • Twin hammer impact mechanism delivers 607 ~ 1830 Nm. of reverse torque,

  • 4 position power management operation    by turn-knob,

  • Feather touch trigger provide extramly precise & smooth speed control,

  • Made in Taiwan.

Specification
Model No. Square Driver Max. Torque Max. Rverse Torque Free Speed Working Pressure Air Inlet Hose Size Net Weight Overall Length Packing(Kgs)
Inch. Ft-lbs Nm Ft-lbs Nm RPM PSI Inch. Inch. lbs Kgs Inch. mm. Pcs/CTN/NW/GW/Cuft
PIW-0801 3/8 400 542 450 607 11,000 90 1/4 3/8 3.0 1.38 6.1 155 10/CTN/17/18/1.1
PIW-0803 1/2 600 810 780 1,054 8,000 90 1/4 3/8 4.84 2.2 7.3 186 10/CTN/22.5/24.5/1.5
PIW-0804 3/4 900 1,220 1,350 1,830 7,000 90 1/4 3/8 7.48 3.4 8.47 215 4/CTN/17.5/19/1.2

 

Attention

1. Before using it, the machine must be checked, and a responsible person is needed.

2. If found missing parts, please repair in time, otherwise, will decrease the life of the machine.

3. If socket doesn't cover nut (screw slot), it is forbidden to press the switch.

4. The hub connection must be connected with a special pin and sealing aprons. (screwdriver lock type)

5. It is forbidden  to load or unload wrech head or clean the machine with pressure on.

6. All the equipment without the permission of the person in charge is not allowed to start.

7. When the machine is off-duty, it must be clean and stored in a proper place.

8. To prevent premature wear of the machine, please do not overload or high speed idle.

9. Daily and monthly maintenance should be done in order to extend the life of the machine

QQ联络我们

wechat联络我们

Skype联络我们

观看更多
关于我们的影片

观看更多
关于我们的影片