-
Handle exhaust,
-
Extremely short body with length of 106 mmL and weight of 1.27 Kgs / 2.79 Lbs,
-
The one-handed forward/reverse push button and 3-mode power regulator provide the max control,
-
Feather touch trigger provide extramly precise & smooth speed control,
-
Twin hammer impact mechanism delivers 743 Nm. of reverse torque,
-
3-position power management operation by turn-knob,
-
3 different regulation settings in forward and full power in reverse,
-
Made in Taiwan.
Model No. | Square Driver | Max. Torque | Max. Rverse Torque | Free Speed | Working Pressure | Air Inlet | Hose Size | Net Weight | Overall Length | Packing(Kgs) | ||||
Inch. | Ft-lbs | Nm | Ft-lbs | Nm | RPM | PSI | Inch. | Inch. | lbs | Kgs | Inch. | mm. | Pcs/CTN/NW/GW/Cuft | |
PIW-1000 | 1/2 | 500 | 675 | 550 | 743 | 11,000 | 90 | 1/4 | 3/8 | 2.79 | 1.27 | 4.17 | 106 | 10/CTN/11/12/1.1 |
1. Before using it, the machine must be checked, and a responsible person is needed.
2. If found missing parts, please repair in time, otherwise, will decrease the life of the machine.
3. If socket doesn't cover nut (screw slot), it is forbidden to press the switch.
4. The hub connection must be connected with a special pin and sealing aprons. (screwdriver lock type)
5. It is forbidden to load or unload wrech head or clean the machine with pressure on.
6. All the equipment without the permission of the person in charge is not allowed to start.
7. When the machine is off-duty, it must be clean and stored in a proper place.
8. To prevent premature wear of the machine, please do not overload or high speed idle.
9. Daily and monthly maintenance should be done in order to extend the life of the machine